5510 Hydrualic overflow Cancel The title field is required!

1. David Patterson

   

   0 posts
   
   8/27/2014 9:08 AM

   Greetings,
   
   We are having problems identifying what is causing hydraulic fluid to overflow out of the tank to our Toro 5510. The leak detector has been changed within 2 years. Is it possible for a leak detector to fail within 2 years? Not sure where to start.
   
   Thanks in advance.
   
   David P
   Buckhorn Properties
   Brandon, Florida

   
   
   
   
2. Andy Jorgensen

   

   1 posts
   
   8/27/2014 2:08 PM

   We've had to change the leak detector in our 5610's a couple of times. One machine in particular is on its third one. This machine is less than 4 years old.
   
   But, If your fluid is overflowing, that would tell me it is overfilled. Toro has specific instructions when filling the fluid after changing a leak detector. I can't remember what exactly it is, but your service rep should know. But if you haven't changed it in two years...that shouldn't be the cause.

   
   
   
   
3. Kenneth Meals

   

   2 posts
   
   8/28/2014 10:08 AM

   For filling the 5010 series mower with the leak detection you have to use the ACE handheld tool to set the hydraulic level.