JD 2500 REEL TRIPLEX HYDRAULIC PROBLEM Cancel The title field is required!

1. Timothy Johnston

   

   0 posts
   
   3/20/2016 5:03 AM

   Morning,
   Having difficulties with a John Deere 2500 triplex. Engine was rebuilt over the winter, and is running smooth. But when reels are engaged and we try to lift the hydraulics for transport the engine bogs down and has an enormous strain to the point of stalling. Hydraulic filter clean, and new fluid filled.
   Could hyd lines be run wrong, reversed somehow?
   Hyd Pump bad?
   Any help appreciated, Thanks All!

   
   
   
   
2. Bob Pruneau

   

   5 posts
   
   4/21/2016 3:04 AM

   Gas engine ? was it running ok before engine rebuild? Governor spring not hooked up right ? or reversed line maybe check to see if by pass on pump is in the right spot . Right ( JD20 ) hydraulic fluid filled to the mark .

   
   
   
   
3. Frank McQuiggan

   

   2 posts
   
   4/25/2016 7:04 AM

   Does the problem stay all the time or is it just when first starting out in the morning? I have had them be a bit sluggish first thing in the morning when first starting up but after the fluid warms a bit they run fine.