Toro 3250 Issues Cancel The title field is required!

1. Ryan Reimer

   

   3 posts
   
   8/22/2016 12:08 PM

   I'm having some problems with one of our Toro 3250 triplex mowers. The steering control valve was leaking, repaired it and started it up. Then the right lift cylinder started leaking so I purchased a new one from Toro and installed it. Now all it will do on that new cylinder is try to lift, it will not lower. The other two cylinders work just fine. None of my hoses are crossed, so I'm thinking I have an issue with the manifold block. Anyone dealt with these before? Can they create too much pressure on reel motors and/or cylinders causing them to leak?

   
   
   
   
2. Robert Tillema

   

   21 posts
   
   8/22/2016 6:08 PM

   Items to check, hyd system full of fluid.
   With engine running, bleed some fluid on both hoses, one at a time.
   This will check for air in lines.
   Let me know if that fixes the problem.
   You said the lines were not crossed, double check hoses.

   
   Commercial Customer Parts & Service Videos
   
   
3. Ryan Reimer

   

   3 posts
   
   8/23/2016 5:08 AM

   Loosened both hoses. Only one bled any fluid out.