Toro greens mower 3050 bed knife issues Cancel The title field is required!

1. Kyle Cornell

   

   0 posts
   
   10/14/2016 12:10 PM

   Hey, first time posting. I have a Toro 3050 greens mower and I'm having issues with the bed knife cutting on one side of the reel and not the other. We just reground our bedknives to true them up and I'm having the same issue as I did before we ground them. What does the eccentric bedknife bolt have to do with making the bed knife parallel? is there a trick to it? Anything would be helpful! I know it's nearing the end of the season here in Wisconsin, but a greensmower that isn't striping right can be frustrating.

   
   
   
   
2. Max Lamas

   

   0 posts
   
   10/14/2016 12:10 PM

   The eccentric bolt is what trues up the bedknife. If you look at the end of that bolt; it is not dead center. The manual will tell you what to do. Take a gauge and find the clearance on the normal bolt side. Then turn the eccentric bolt until the other side is the same clearance. Your looking at reel to bedknife clearance.
   
   check your private messages