Forum Groups

 

Forums / Talking Turf / Aerway Slicer

Aerway Slicer

3 posts
  1. Jeffrey Sexton
    Jeffrey Sexton avatar
    0 posts
    2/14/2016 6:02 PM
    I am looking for input from people slicing warm season fairways with an aerway slicer. How long does it take? What process do you use? What type of slicing tine do you use? How many times do you do it? How wide is your machine? Pull type or 3 point hitch? Any input would be appreciated.



  2. Steven Scott
    Steven Scott avatar
    0 posts
    2/15/2016 11:02 AM
    We borrowed a 60" 3 point hitch Aerway from another course a few years ago and sliced fairways, tees, and roughs. We went over fairways, tees, and any heavily trafficked rough twice and the rest of the rough once, about 100 acres total. With the 60" unit and the rough ground we have keeping the tractor ground speed down it took us 2 1/2 days. I have no idea as to which slicing tine the unit we borrowed had in it as they were worn to the point that the equipment tech was going to replace them as soon as we returned the aerator. I like the unit but my property really needs coring about once a year at this point.



  3. Timothy Walker
    Timothy Walker avatar
    0 posts
    2/16/2016 10:02 AM
    had a 60' pull behind in Pa we did 9 holes in 3 hours fairways only. did as often as needed....mowed right after to clean up. we had a sport tines and shatter tines



View or change your forums profile here.