john deer 9009A Cancel The title field is required!

1. Christopher Ricketts

   

   3 posts
   
   11/10/2020 6:11 AM

   HELP i have 2 9009A that are cutting unevenly scalping here and there
   i replaced the rollers and changed HOC but on hills it will dig in on one side or the other 
   any one had this issue  

   
   
   
   
2. Steven Scotland

   

   3 posts
   
   11/16/2020 8:11 AM in reply to Christopher Ricketts

   Check for bent yokes and lift arms

   
   
   
   
3. James Smith

   

   113 posts
   
   11/16/2020 11:11 AM

   Check to make sure one of your blades are not bent.

   
   
   
   
4. Bob Pruneau

   

   5 posts
   
   11/28/2020 5:11 AM

   Unusually wet conditions? Did it always dig in ? Jump in growth ( mow more often or at least the areas that are too Healthy) decks move freely? ( seized bushings ?) .if there is any adjustments for down pressure check them ( maybe broken down pressure spring or bracket stops ( what ever the manufacturer has set up ) are missing or broken . If you have a lift try raising machine up a couple of feet and see if you have full range of motion on decks . Bushings , lift cylinder seizing   Etc etc etc

   
   
   
   

   Last modified on 28 Nov 2020 12:11 by Bob Pruneau