3250 grooming mower shaft Cancel The title field is required!

1. James Smith

   

   113 posts
   
   8/10/2017 1:08 PM

   Our grooming mower shaft on our 3250 keep wearing out on the non pulley end of the shaft. We pulled one off today and see where there is a bolt part that screws into this end of the shaft (non pulley end). this end goes into the bearing in the housing with a plug covering it.
   Has anyone found a place to get these bolts. Toro does not offer it as far as I know and it took me about 30 minutes just to explain to them what it was.

   
   
   
   
2. Zachary Hill

   

   1 posts
   
   8/11/2017 10:08 AM

   R & R Products has a lot of parts for these units, may want to check them out.

   
   
   
   
3. James Smith

   

   113 posts
   
   8/12/2017 5:08 AM

   Thanks will do.

   
   
   
   
4. James Smith

   

   113 posts
   
   8/12/2017 8:08 AM

   well they do not carry it either. Im looking into a machine shop to see if new harder ends can be installed on it. why would anyone use a softer metal than the bearing is made out of is beyond me.