Bench top reel stand Cancel The title field is required!

1. Timothy Hood

   

   0 posts
   
   12/15/2016 9:12 AM

   Is there a stand to purchase that will position a reel off the bench to check hoc and cutting.
   Thanks
   Tim

   
   
   
   
2. Roland McPhearson

   

   9 posts
   
   12/16/2016 5:12 AM

   Which reels? I bought one for my PGMs from Trion. It lifts the entire mower up granting access to the bottom for adjusting. Used in conjunction with a Trion lift.

   
   
   
   
3. Timothy Hood

   

   0 posts
   
   12/23/2016 6:12 AM

   This would be for any independent reel unit (greens, tees and fairways). It would prevent us from flipping the unit over to check cutting. It would also get the unit high enough to check hoc with tool.
   Thanks

   
   
   
   
4. Stephen Tucker

   

   0 posts
   
   12/23/2016 8:12 AM

   Not something you can purchase but you could build this maybe onto a workbench. Mine comes off the surface plate but should work the same way. http://www.stephentucker.net/daily-grin ... standards/

   
   
   
   
5. Michael Kriz

   

   0 posts
   
   12/23/2016 8:12 AM

   Here is a video of ST's table in use, your hoc adjustment is near the end
   
   https://www.youtube.com/watch?v=LsW3eXtWRX4

   
   
   
   
6. Timothy Hood

   

   0 posts
   
   12/29/2016 4:12 PM

   Stephen
   That's what I was looking for.
   Thanks for the reply.
   Tim