Resetting Hour-meter on ProCore 648 Cancel The title field is required!

1. Steven Chernosky

   

   4 posts
   
   3/8/2022 5:03 AM

   It was finally time to change the hydraulic fluid on our 648 yet the hour meter is still saying it needs to be changed.  Anyone know how to reset this?
   
   Thanks.

   
   
   
   
2. John Weidler

   

   13 posts
   
   3/15/2022 1:03 PM in reply to Steven Chernosky

   Hour Meter/Tachometer
   When the engine shuts off, the hour meter/tachometer (Figure 12) displays the number of hours the engine has run.
   When the engine is running, hour meter/tachometer displays the engine speed in revolutions per minute (rpm).
   The hour meter/tachometer displays the following maintenance reminders:
   After the first 50 hours of operation and then after every 100 hours (e.g., 150, 250, 350, etc.), the screen displays “CHG OIL” to remind you to change the engine oil.
   After every 100 hours (e.g., 100, 200, 300, etc.), the screen displays “SVC” to remind you to perform the other maintenance procedures based on a 100, 200, or 500 hour schedule.
   Note: These reminders display starting 3 hours prior to the service interval time and flash at regular intervals for 6 hours.